-,-,-,-,-,-,MG-800 2630,MG-800 2625,MG-800 2620,MG-800 2615,-
Hot Tags: epb лагери, Китай, производители, доставчици, фабрика, търговия на едро, персонализирани, купуване, ценова листа, ценова листа, на склад, безплатна проба, втулки за хидравлични плъзгащи лагери, лагери epb, самосмазващи се лагери с нажежаема жичка, лагери от стомана с влакнеста тъкан, маргинални pb втулки, цилиндрични pb втулки
MG-800 Биметални опаковани втулки Спецификация и толеранс
MG-800 Bimetallic self-lubricating bearing uses high quality low-carbon steel plate as backing, sintered porous bronze as its liner, suitable for rotatory oscillating, reciprocating movements in the conditions of high load, low speed, low friction, wear resistance, a long working life span on preventing the mating parts from holding-on. The bronze layer surface can be machined with various of grooves, oil pockets in terms of different working conditions. The product is widely used in mining machinery, automobile, building machinery, agriculture equipment, rolling steel industry etc.
| Technical Data | ||||
| MG-800 Bimetal Bushing | MG-720 Bimetal Bushing | MG-700 Bimetal Bushing | MG-20 Bimetal Bushing | |
| Data |  |  |  |  |
| Material type | CuPb10Sn10/ CuSn6Zn6Pb3 | CuPb24Sn4 | CuPb30 | AlSn20Cu |
| Hardmess of bronze alloy | 70~100HB | 45~70HB | 30~45HB | 30~40HB |
| Max. dynamic Load | 65N/mm | 38N/mm | 25N/mm | 30N/mm2 |
| "Mpa Sapphire" fatigue class | 125 | 115 | 105 | 105 |
| Friction coenncient(oil) | 0.06~0.14 | 0.06~0.16 | 0.08~0.16 | 0.08~0.17 |
| PV limit(Grease) | 2.8N/mm .M/s | 2.8N/mm .M/s | - | - |
| PV limit(Oil) | 10N/mm .M/s | 10N/mm .M/s | 8N/mm .M/s | 6N/mm2.M/s |
| Max. temperature | 260 C | 200 C | 170 C | 150oC |
| Load limit | 150N/mm | 130N/mm | 120N/mm | 100N/mm2 |
| Speed limit v max. | 5m/s | 10m/s | 15m/s | 25m/s |
| Hardness of mating surface | 53 HRC | 50 HRC | 270 HB | 250 HB |
| Tensile strength | 150N/mm | 150N/mm | 200N/mm | 200N/mm2 |
◆ Bimetal self-lubricating bearings grooves
◆ Surface Roughness of Bimetal Bushes:
| List | Bronze Surface | Bronze Surface |
| Bronze Surface | R20.8 | R26.3 |
| Steel Backing | R21.6 | R210 |
| Other Surfaces | R22.5 | R2100 |
◆ Standard Size：
Cylindrical Bearing, Flange Bearing. Non-Standard Size：
Cylindrical Bearing, Flange Bearing, Thrust washer, Half bushing, Wear strips, Steel combined units.
- Length
-
10 :-
-
15 :MG-800 2615
-
20 :MG-800 2620
-
25 :MG-800 2625
-
30 :MG-800 2630
-
40 :-
-
50 :-
-
60 :-
-
80 :-
-
90 :-
-
100 :-
-
d (mm) :26
-
Д: :30
-
Ds :26
-
Tolerance :－0.033
-
Housing Dh :30
-
Tolerance :＋0.021
-
After fixed Di,a :＋0.181 ＋0.040
-
Clearance CD :0.214 0.040
-
Wall thickness S3 :1.980 1.920
-
Oil hole dL :6
